Shandong Liandi Paint Industry

Since its establishment, Shandong Liandi Paint Company has adhered to the principle of high-quality and efficient tracking services, adhered to the principle of winning by quality in production, winning by business, winning by trust, and winning by service and sincerity, and has won the recognition and favor of consumers. The products sell well in 16 provinces, municipalities, autonomous regions, municipalities including Shandong, Shanxi, Henan, Hebei, Jiangsu, Anhui, Liaoning, Beijing, Tianjin and more than 300 large and medium-sized cities. We are now looking for agents in Shandong, Laiwu, Binzhou, Liaocheng, Jinan, Rizhao, Dongying, Tai'an, Linyi, Heze, Zaozhuang, Weihai, Yantai and other places.
Contact person: Mr. Li
If you are interested, you are welcome to inquire and we can send you a sample to try.

The first component of this paint is composed of hydroxyl-containing alkyd resin. The slurry is the first ingredient and the curing agent is the second ingredient. It is a two-component paint.
The second characteristic is good gloss, durability, moisture and heat resistance, and excellent salt spray resistance.
Three uses: Suitable for various metals, wood, glass fiber reinforced plastics, etc., especially suitable for protection and decoration of vehicles, towers, etc.
Four technical requirements:
< > Project

> Indicators


< > Paint film color and appearance

> Comply with the standard sample, within the color difference range, the paint film is smooth and smooth


< > Solid content (component one) %

>


< > Fineness

>


< > Drying time

> Surface dry
/> Solid dry (drying ℃)


< > Flexibility

>


< > Impact strength< br/>
>


< > Adhesion level

>


< > Water resistance

>


< > Gasoline resistance

> Passed


Five Construction Refer to the price of polyurethane enamel paint
Open the barrel and stir: After opening the barrel, stir the paint thoroughly until there is no sediment and color difference at the bottom of the barrel, then it can be applied.
During construction, component 1 and component 2 should be used according to the prescribed ratio, and use as much as possible, and use them up within the prescribed time to avoid waste caused by gelling.
The pot life is generally after the two components are mixed and stirred, and then used up (℃).
During the paint mixing and painting process, water, acid, alkali, alcohol, etc. must not be mixed to avoid affecting the quality of the coating.
When this paint is used in winter, the flexibility of the paint film is poor, so aliphatic products should be selected.
Overcoating interval
< > Substrate temperature ℃

>

>

>


< > Minimum interval

>

>

>


The Paint B component should be kept properly to prevent the paint liquid from gelling and deteriorating.
Coating method: Airless spraying, air spraying, brushing and roller coating can be used.
Construction conditions: ambient temperature ℃℃, relative humidity below %, substrate surface temperature higher than dew point ℃. It is not suitable for construction in bad weather such as rain, snow, fog, wind and sand. In hot summer, construction under strong sunlight should be avoided.
Service guarantee: Our company solemnly promises that if you suffer any losses due to the quality of our products, our company will come to your door to handle it within hours and bear the corresponding losses.